- Problem statement: what kind of problem is presented by the authors and why this problem is important?
- Approach & Design: briefly describe the approach designed by the authors
- Strengths and Weaknesses: list the strengths and weaknesses, in your opinion
- Evaluation: how did the authors evaluate the performance of the proposed scheme? What kind of workload was designed and used?
- Conclusion: by your own judgement.
Live Migration of Virtual Machin
e
s
Christopher Clark, Keir Fraser, Steven Hand, Jacob Gorm Hansen†,
Eric Jul†, Christian Limpach, Ian Pratt, Andrew Warfield
University of Cambridge Computer Laboratory † Department of Computer Science
15 JJ Thomson Avenue, Cambridge, UK University of Copenhagen, Denmark
firstname.lastname@cl.cam.ac.uk {jacobg,eric}@diku.dk
Abstract
Migrating operating system instances across distinct phys-
ical hosts is a useful tool for administrators of data centers
and clusters: It allows a clean separation between hard-
ware and software, and facilitates fault management, load
balancing, and low-level system maintenance.
By carrying out the majority of migration while OSes con-
tinue to run, we achieve impressive performance with min-
imal service downtimes; we demonstrate the migration of
entire OS instances on a commodity cluster, recording ser-
vice downtimes as low as 60ms. We show that that our
performance is sufficient to make live migration a practical
tool even for servers running interactive loads.
In this paper we consider the design options for migrat-
ing OSes running services with liveness constraints, fo-
cusing on data center and cluster environments. We intro-
duce and analyze the concept of writable working set, and
present the design, implementation and evaluation of high-
performance OS migration built on top of the Xen VMM.
1 Introduction
Operating system virtualization has attracted considerable
interest in recent years, particularly from the data center
and cluster computing communities. It has previously been
shown [1] that paravirtualization allows many OS instances
to run concurrently on a single physical machine with high
performance, providing better use of physical resources
and isolating individual OS instances.
In this paper we explore a further benefit allowed by vir-
tualization: that of live OS migration. Migrating an en-
tire OS and all of its applications as one unit allows us to
avoid many of the difficulties faced by process-level mi-
gration approaches. In particular the narrow interface be-
tween a virtualized OS and the virtual machine monitor
(VMM) makes it easy avoid the problem of ‘residual de-
pendencies’ [2] in which the original host machine must
remain available and network-accessible in order to service
certain system calls or even memory accesses on behalf of
migrated processes. With virtual machine migration, on
the other hand, the original host may be decommissioned
once migration has completed. This is particularly valuable
when migration is occurring in order to allow maintenance
of the original host.
Secondly, migrating at the level of an entire virtual ma-
chine means that in-memory state can be transferred in a
consistent and (as will be shown) efficient fashion. This ap-
plies to kernel-internal state (e.g. the TCP control block for
a currently active connection) as well as application-level
state, even when this is shared between multiple cooperat-
ing processes. In practical terms, for example, this means
that we can migrate an on-line game server or streaming
media server without requiring clients to reconnect: some-
thing not possible with approaches which use application-
level restart and layer 7 redirection.
Thirdly, live migration of virtual machines allows a sepa-
ration of concerns between the users and operator of a data
center or cluster. Users have ‘carte blanche’ regarding the
software and services they run within their virtual machine,
and need not provide the operator with any OS-level access
at all (e.g. a root login to quiesce processes or I/O prior to
migration). Similarly the operator need not be concerned
with the details of what is occurring within the virtual ma-
chine; instead they can simply migrate the entire operating
system and its attendant processes as a single unit.
Overall, live OS migration is a extremelely powerful tool
for cluster administrators, allowing separation of hardware
and software considerations, and consolidating clustered
hardware into a single coherent management domain. If
a physical machine needs to be removed from service an
administrator may migrate OS instances including the ap-
plications that they are running to alternative machine(s),
freeing the original machine for maintenance. Similarly,
OS instances may be rearranged across machines in a clus-
ter to relieve load on congested hosts. In these situations the
combination of virtualization and migration significantly
improves manageability.
NSDI ’05: 2nd Symposium on Networked Systems Design & ImplementationUSENIX Association 27
3
We have implemented high-performance migration sup-
port for Xen [1], a freely available open source VMM for
commodity hardware. Our design and implementation ad-
dresses the issues and tradeoffs involved in live local-area
migration. Firstly, as we are targeting the migration of ac-
tive OSes hosting live services, it is critically important to
minimize the downtime during which services are entirely
unavailable. Secondly, we must consider the total migra-
tion time, during which state on both machines is synchro-
nized and which hence may affect reliability. Furthermore
we must ensure that migration does not unnecessarily dis-
rupt active services through resource contention (e.g., CPU,
network bandwidth) with the migrating OS.
Our implementation addresses all of these concerns, allow-
ing for example an OS running the SPECweb benchmark
to migrate across two physical hosts with only 210ms un-
availability, or an OS running a Quake 3 server to migrate
with just 60ms downtime. Unlike application-level restart,
we can maintain network connections and application state
during this process, hence providing effectively seamless
migration from a user’s point of view.
We achieve this by using a pre-copy approach in which
pages of memory are iteratively copied from the source
machine to the destination host, all without ever stopping
the execution of the virtual machine being migrated. Page-
level protection hardware is used to ensure a consistent
snapshot is transferred, and a rate-adaptive algorithm is
used to control the impact of migration traffic on running
services. The final phase pauses the virtual machine, copies
any remaining pages to the destination, and resumes exe-
cution there. We eschew a ‘pull’ approach which faults in
missing pages across the network since this adds a residual
dependency of arbitrarily long duration, as well as provid-
ing in general rather poor performance.
Our current implementation does not address migration
across the wide area, nor does it include support for migrat-
ing local block devices, since neither of these are required
for our target problem space. However we discuss ways in
which such support can be provided in Section 7.
2 Related Work
The Collective project [3] has previously explored VM mi-
gration as a tool to provide mobility to users who work on
different physical hosts at different times, citing as an ex-
ample the transfer of an OS instance to a home computer
while a user drives home from work. Their work aims to
optimize for slow (e.g., ADSL) links and longer time spans,
and so stops OS execution for the duration of the transfer,
with a set of enhancements to reduce the transmitted image
size. In contrast, our efforts are concerned with the migra-
tion of live, in-service OS instances on fast neworks with
only tens of milliseconds of downtime. Other projects that
have explored migration over longer time spans by stop-
ping and then transferring include Internet Suspend/Re-
sume [4] and µDenali [5].
Zap [6] uses partial OS virtualization to allow the migration
of process domains (pods), essentially process groups, us-
ing a modified Linux kernel. Their approach is to isolate all
process-to-kernel interfaces, such as file handles and sock-
ets, into a contained namespace that can be migrated. Their
approach is considerably faster than results in the Collec-
tive work, largely due to the smaller units of migration.
However, migration in their system is still on the order of
seconds at best, and does not allow live migration; pods
are entirely suspended, copied, and then resumed. Further-
more, they do not address the problem of maintaining open
connections for existing services.
The live migration system presented here has considerable
shared heritage with the previous work on NomadBIOS [7],
a virtualization and migration system built on top of the
L4 microkernel [8]. NomadBIOS uses pre-copy migration
to achieve very short best-case migration downtimes, but
makes no attempt at adapting to the writable working set
behavior of the migrating OS.
VMware has recently added OS migration support, dubbed
VMotion, to their VirtualCenter management software. As
this is commercial software and strictly disallows the publi-
cation of third-party benchmarks, we are only able to infer
its behavior through VMware’s own publications. These
limitations make a thorough technical comparison impos-
sible. However, based on the VirtualCenter User’s Man-
ual [9], we believe their approach is generally similar to
ours and would expect it to perform to a similar standard.
Process migration, a hot topic in systems research during
the 1980s [10, 11, 12, 13, 14], has seen very little use for
real-world applications. Milojicic et al [2] give a thorough
survey of possible reasons for this, including the problem
of the residual dependencies that a migrated process re-
tains on the machine from which it migrated. Examples of
residual dependencies include open file descriptors, shared
memory segments, and other local resources. These are un-
desirable because the original machine must remain avail-
able, and because they usually negatively impact the per-
formance of migrated processes.
For example Sprite [15] processes executing on foreign
nodes require some system calls to be forwarded to the
home node for execution, leading to at best reduced perfor-
mance and at worst widespread failure if the home node is
unavailable. Although various efforts were made to ame-
liorate performance issues, the underlying reliance on the
availability of the home node could not be avoided. A sim-
ilar fragility occurs with MOSIX [14] where a deputy pro-
cess on the home node must remain available to support
remote execution.
NSDI ’05: 2nd Symposium on Networked Systems Design & Implementation USENIX Association274
We believe the residual dependency problem cannot easily
be solved in any process migration scheme – even modern
mobile run-times such as Java and .NET suffer from prob-
lems when network partition or machine crash causes class
loaders to fail. The migration of entire operating systems
inherently involves fewer or zero such dependencies, mak-
ing it more resilient and robust.
3 Design
At a high level we can consider a virtual machine to encap-
sulate access to a set of physical resources. Providing live
migration of these VMs in a clustered server environment
leads us to focus on the physical resources used in such
environments: specifically on memory, network and disk.
This section summarizes the design decisions that we have
made in our approach to live VM migration. We start by
describing how memory and then device access is moved
across a set of physical hosts and then go on to a high-level
description of how a migration progresses.
3.1 Migrating Memory
Moving the contents of a VM’s memory from one phys-
ical host to another can be approached in any number of
ways. However, when a VM is running a live service it
is important that this transfer occurs in a manner that bal-
ances the requirements of minimizing both downtime and
total migration time. The former is the period during which
the service is unavailable due to there being no currently
executing instance of the VM; this period will be directly
visible to clients of the VM as service interruption. The
latter is the duration between when migration is initiated
and when the original VM may be finally discarded and,
hence, the source host may potentially be taken down for
maintenance, upgrade or repair.
It is easiest to consider the trade-offs between these require-
ments by generalizing memory transfer into three phases:
Push phase The source VM continues running while cer-
tain pages are pushed across the network to the new
destination. To ensure consistency, pages modified
during this process must be re-sent.
Stop-and-copy phase The source VM is stopped, pages
are copied across to the destination VM, then the new
VM is started.
Pull phase The new VM executes and, if it accesses a page
that has not yet been copied, this page is faulted in
(“pulled”) across the network from the source VM.
Although one can imagine a scheme incorporating all three
phases, most practical solutions select one or two of the
three. For example, pure stop-and-copy [3, 4, 5] involves
halting the original VM, copying all pages to the destina-
tion, and then starting the new VM. This has advantages in
terms of simplicity but means that both downtime and total
migration time are proportional to the amount of physical
memory allocated to the VM. This can lead to an unaccept-
able outage if the VM is running a live service.
Another option is pure demand-migration [16] in which a
short stop-and-copy phase transfers essential kernel data
structures to the destination. The destination VM is then
started, and other pages are transferred across the network
on first use. This results in a much shorter downtime, but
produces a much longer total migration time; and in prac-
tice, performance after migration is likely to be unaccept-
ably degraded until a considerable set of pages have been
faulted across. Until this time the VM will fault on a high
proportion of its memory accesses, each of which initiates
a synchronous transfer across the network.
The approach taken in this paper, pre-copy [11] migration,
balances these concerns by combining a bounded itera-
tive push phase with a typically very short stop-and-copy
phase. By ‘iterative’ we mean that pre-copying occurs in
rounds, in which the pages to be transferred during round
n are those that are modified during round n− 1 (all pages
are transferred in the first round). Every VM will have
some (hopefully small) set of pages that it updates very
frequently and which are therefore poor candidates for pre-
copy migration. Hence we bound the number of rounds of
pre-copying, based on our analysis of the writable working
set (WWS) behavior of typical server workloads, which we
present in Section 4.
Finally, a crucial additional concern for live migration is the
impact on active services. For instance, iteratively scanning
and sending a VM’s memory image between two hosts in
a cluster could easily consume the entire bandwidth avail-
able between them and hence starve the active services of
resources. This service degradation will occur to some ex-
tent during any live migration scheme. We address this is-
sue by carefully controlling the network and CPU resources
used by the migration process, thereby ensuring that it does
not interfere excessively with active traffic or processing.
3.2 Local Resources
A key challenge in managing the migration of OS instances
is what to do about resources that are associated with the
physical machine that they are migrating away from. While
memory can be copied directly to the new host, connec-
tions to local devices such as disks and network interfaces
demand additional consideration. The two key problems
that we have encountered in this space concern what to do
with network resources and local storage.
NSDI ’05: 2nd Symposium on Networked Systems Design & ImplementationUSENIX Association 275
For network resources, we want a migrated OS to maintain
all open network connections without relying on forward-
ing mechanisms on the original host (which may be shut
down following migration), or on support from mobility
or redirection mechanisms that are not already present (as
in [6]). A migrating VM will include all protocol state (e.g.
TCP PCBs), and will carry its IP address with it.
To address these requirements we observed that in a clus-
ter environment, the network interfaces of the source and
destination machines typically exist on a single switched
LAN. Our solution for managing migration with respect to
network in this environment is to generate an unsolicited
ARP reply from the migrated host, advertising that the IP
has moved to a new location. This will reconfigure peers
to send packets to the new physical address, and while a
very small number of in-flight packets may be lost, the mi-
grated domain will be able to continue using open connec-
tions with almost no observable interference.
Some routers are configured not to accept broadcast ARP
replies (in order to prevent IP spoofing), so an unsolicited
ARP may not work in all scenarios. If the operating system
is aware of the migration, it can opt to send directed replies
only to interfaces listed in its own ARP cache, to remove
the need for a broadcast. Alternatively, on a switched net-
work, the migrating OS can keep its original Ethernet MAC
address, relying on the network switch to detect its move to
a new port1.
In the cluster, the migration of storage may be similarly ad-
dressed: Most modern data centers consolidate their stor-
age requirements using a network-attached storage (NAS
)
device, in preference to using local disks in individual
servers. NAS has many advantages in this environment, in-
cluding simple centralised administration, widespread ven-
dor support, and reliance on fewer spindles leading to a
reduced failure rate. A further advantage for migration is
that it obviates the need to migrate disk storage, as the NAS
is uniformly accessible from all host machines in the clus-
ter. We do not address the problem of migrating local-disk
storage in this paper, although we suggest some possible
strategies as part of our discussion of future work.
3.3 Design Overview
The logical steps that we execute when migrating an OS are
summarized in Figure 1. We take a conservative approach
to the management of migration with regard to safety and
failure handling. Although the consequences of hardware
failures can be severe, our basic principle is that safe mi-
gration should at no time leave a virtual OS more exposed
1Note that on most Ethernet controllers, hardware MAC filtering will
have to be disabled if multiple addresses are in use (though some cards
support filtering of multiple addresses in hardware) and so this technique
is only practical for switched networks.
Stage 0: Pre-Migration
Active VM on
Host A
Alternate physical host may be preselected for migration
Block devices mirrored and free resources maintained
Stage 4: Commitment
VM state on Host A is released
Stage 5: Activation
VM starts on
Host B
Connects to local devices
Resumes normal operation
Stage 3: Stop and copy
Suspend VM on host A
Generate ARP to redirect traffic to Host B
Synchronize all remaining VM state to Host B
Stage 2: Iterative Pre-copy
Enable shadow paging
Copy dirty pages in successive rounds.
Stage 1: Reservation
Initialize a container on the target host
Downtime
(VM Out of Service)
VM running normally on
Host A
VM running normally on
Host B
Overhead due to copying
Figure 1: Migration timeline
to system failure than when it is running on the original sin-
gle host. To achieve this, we view the migration process as
a transactional interaction between the two hosts involved:
Stage 0: Pre-Migration We begin with an active VM on
physical host A. To speed any future migration, a tar-
get host may be preselected where the resources re-
quired to receive migration will be guaranteed.
Stage 1: Reservation A request is issued to migrate an OS
from host A to host B. We initially confirm that the
necessary resources are available on B and reserve a
VM container of that size. Failure to secure resources
here means that the VM simply continues to run on A
unaffected.
Stage 2: Iterative Pre-Copy During the first iteration, all
pages are transferred from A to B. Subsequent itera-
tions copy only those pages dirtied during the previous
transfer phase.
Stage 3: Stop-and-Copy We suspend the running OS in-
stance at A and redirect its network traffic to B. As
described earlier, CPU state and any remaining incon-
sistent memory pages are then transferred. At the end
of this stage there is a consistent suspended copy of
the VM at both A and B. The copy at A is still con-
sidered to be primary and is resumed in case of failure.
Stage 4: Commitment Host B indicates to A that it has
successfully received a consistent OS image. Host A
acknowledges this message as commitment of the mi-
gration transaction: host A may now discard the orig-
inal VM, and host B becomes the primary host.
Stage 5: Activation The migrated VM on B is now ac-
tivated. Post-migration code runs to reattach device
drivers to the new machine and advertise moved IP
addresses.
NSDI ’05: 2nd Symposium on Networked Systems Design & Implementation USENIX Association276
Elapsed time (sec
s)
0 2000 4000 6000 8000 10000 1200
0
N
um
be
ro
fp
ag
es
0
10000
20000
30000
40000
50000
60000
70000
80000
Tracking the Writable Working Set of SPEC CINT
2000
gzip vpr gcc mcf crafty parser eon perlbmk gap vortex bzip2 twolf
Figure 2: WWS curve for a complete run of SPEC CINT2000 (512MB VM)
This approach to failure management ensures that at least
one host has a consistent VM image at all times during
migration. It depends on the assumption that the original
host remains stable until the migration commits, and that
the VM may be suspended and resumed on that host with
no risk of failure. Based on these assumptions, a migra-
tion request essentially attempts to move the VM to a new
host, and on any sort of failure execution is resumed locally,
aborting the migration.
4 Writable Working Sets
When migrating a live operating system, the most signif-
icant influence on service performance is the overhead of
coherently transferring the virtual machine’s memory im-
age. As mentioned previously, a simple stop-and-copy ap-
proach will achieve this in time proportional to the amount
of memory allocated to the VM. Unfortunately, during this
time any running services are completely unavailable.
A more attractive alternative is pre-copy migration, in
which the memory image is transferred while the operat-
ing system (and hence all hosted services) continue to run.
The drawback however, is the wasted overhead of trans-
ferring memory pages that are subsequently modified, and
hence must be transferred again. For many workloads there
will be a small set of memory pages that are updated very
frequently, and which it is not worth attempting to maintain
coherently on the destination machine before stopping and
copying the remainder of the VM.
The fundamental question for iterative pre-copy migration
is: how does one determine when it is time to stop the pre-
copy phase because too much time and resource is being
wasted? Clearly if the VM being migrated never modifies
memory, a single pre-copy of each memory page will suf-
fice to transfer a consistent image to the destination. How-
ever, should the VM continuously dirty pages faster than
the rate of copying, then all pre-copy work will be in vain
and one should immediately stop and copy.
In practice, one would expect most workloads to lie some-
where between these extremes: a certain (possibly large)
set of pages will seldom or never be modified and hence are
good candidates for pre-copy, while the remainder will be
written often and so should best be transferred via stop-and-
copy – we dub this latter set of pages the writable working
set (WWS) of the operating system by obvious extension
of the original working set concept [17].
In this section we analyze the WWS of operating systems
running a range of different workloads in an attempt to ob-
tain some insight to allow us build heuristics for an efficient
and controllable pre-copy implementation.
4.1 Measuring Writable Working Sets
To trace the writable working set behaviour of a number of
representative workloads we used Xen’s shadow page ta-
bles (see Section 5) to track dirtying statistics on all pages
used by a particular executing operating system. This al-
lows us to determine within any time period the set of pages
written to by the virtual machine.
Using the above, we conducted a set of experiments to sam-
NSDI ’05: 2nd Symposium on Networked Systems Design & ImplementationUSENIX Association 277
Effect of Bandwidth and Pre−Copy Iterations on Migration Downtime
(Based on a page trace of Linux Kernel Compile)
Migration throughput: 128 Mbit/sec
Elapsed time (se
c)
0 100 200 300 400 500
600
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.
5
1
1.5
2
2.5
3
3.5
4
Migration throughput: 256 Mbit/sec
Elapsed time (sec)
0 100 200 300 400 500 600
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.5
1
1.5
2
2.5
3
3.5
4
Migration throughput: 512 Mbit/sec
Elapsed time (sec)
0 100 200 300 400 500 600
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.5
1
1.5
2
2.5
3
3.5
4
Figure 3: Expected downtime due to last-round memory
copy on traced page dirtying of a Linux kernel compile.
Effect of Bandwidth and Pre−Copy Iterations on Migration Downtime
(Based on a page trace of OLTP Database Benchmark)
Migration throughput: 128 Mbit/sec
Elapsed time (sec)
0 200 400 600 800 1000 1
200
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
1000
2000
3000
4000
5000
6000
7000
8000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.5
1
1.5
2
2.5
3
3.5
4
Migration throughput: 256 Mbit/sec
Elapsed time (sec)
0 200 400 600 800 1000 1200
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
1000
2000
3000
4000
5000
6000
7000
8000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.5
1
1.5
2
2.5
3
3.5
4
Migration throughput: 512 Mbit/sec
Elapsed time (sec)
0 200 400 600 800 1000 1200
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
1000
2000
3000
4000
5000
6000
7000
8000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.5
1
1.5
2
2.5
3
3.5
4
Figure 4: Expected downtime due to last-round memory
copy on traced page dirtying of OLTP.
Effect of Bandwidth and Pre−Copy Iterations on Migration Downtime
(Based on a page trace of Quake 3 Server)
Migration throughput: 128 Mbit/sec
Elapsed time (sec)
0 100 200 300 400
500
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
100
200
300
400
500
600
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.1
0.2
0.3
0.4
0.5
Migration throughput: 256 Mbit/sec
Elapsed time (sec)
0 100 200 300 400 500
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
100
200
300
400
500
600
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.1
0.2
0.3
0.4
0.5
Migration throughput: 512 Mbit/sec
Elapsed time (sec)
0 100 200 300 400 500
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
100
200
300
400
500
600
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
0.1
0.2
0.3
0.4
0.5
Figure 5: Expected downtime due to last-round memory
copy on traced page dirtying of a Quake 3 server.
Effect of Bandwidth and Pre−Copy Iterations on Migration Downtime
(Based on a page trace of SPECweb)
Migration throughput: 128 Mbit/sec
Elapsed time (sec)
0 100 200 300 400 500 600 700
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
2000
4000
6000
8000
10000
12000
14000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
1
2
3
4
5
6
7
8
9
Migration throughput: 256 Mbit/sec
Elapsed time (sec)
0 100 200 300 400 500 600 700
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
2000
4000
6000
8000
10000
12000
14000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
1
2
3
4
5
6
7
8
9
Migration throughput: 512 Mbit/sec
Elapsed time (sec)
0 100 200 300 400 500 600 700
R
at
e
of
pa
ge
di
rty
in
g
(p
ag
es
/s
ec
)
0
2000
4000
6000
8000
10000
12000
14000
E
xp
ec
te
d
do
w
nt
im
e
(s
ec
)
0
1
2
3
4
5
6
7
8
9
Figure 6: Expected downtime due to last-round memory
copy on traced page dirtying of SPECweb.
NSDI ’05: 2nd Symposium on Networked Systems Design & Implementation USENIX Association278
ple the writable working set size for a variety of bench-
marks. Xen was running on a dual processor Intel Xeon
2.4GHz machine, and the virtual machine being measured
had a memory allocation of 512MB. In each case we started
the relevant benchmark in one virtual machine and read
the dirty bitmap every 50ms from another virtual machine,
cleaning it every 8 seconds – in essence this allows us to
compute the WWS with a (relatively long) 8 second win-
dow, but estimate it at a finer (50ms) granularity.
The benchmarks we ran were SPEC CINT2000, a Linux
kernel compile, the OSDB OLTP benchmark using Post-
greSQL and SPECweb99 using Apache. We also measured
a Quake 3 server as we are particularly interested in highly
interactive workloads.
Figure 2 illustrates the writable working set curve produced
for the SPEC CINT2000 benchmark run. This benchmark
involves running a series of smaller programs in order and
measuring the overall execution time. The x-axis measures
elapsed time, and the y-axis shows the number of 4KB
pages of memory dirtied within the corresponding 8 sec-
ond interval; the graph is annotated with the names of the
sub-benchmark programs.
From this data we observe that the writable working set
varies significantly between the different sub-benchmarks.
For programs such as ‘eon’ the WWS is a small fraction of
the total working set and hence is an excellent candidate for
migration. In contrast, ‘gap’ has a consistently high dirty-
ing rate and would be problematic to migrate. The other
benchmarks go through various phases but are generally
amenable to live migration. Thus performing a migration
of an operating system will give different results depending
on the workload and the precise moment at which migra-
tion begins.
4.2 Estimating Migration Effectiveness
We observed that we could use the trace data acquired to
estimate the effectiveness of iterative pre-copy migration
for various workloads. In particular we can simulate a par-
ticular network bandwidth for page transfer, determine how
many pages would be dirtied during a particular iteration,
and then repeat for successive iterations. Since we know
the approximate WWS behaviour at every point in time, we
can estimate the overall amount of data transferred in the fi-
nal stop-and-copy round and hence estimate the downtime.
Figures 3–6 show our results for the four remaining work-
loads. Each figure comprises three graphs, each of which
corresponds to a particular network bandwidth limit for
page transfer; each individual graph shows the WWS his-
togram (in light gray) overlaid with four line plots estimat-
ing service downtime for up to four pre-copying rounds.
Looking at the topmost line (one pre-copy iteration),
the first thing to observe is that pre-copy migration al-
ways performs considerably better than naive stop-and-
copy. For a 512MB virtual machine this latter approach
would require 32, 16, and 8 seconds downtime for the
128Mbit/sec, 256Mbit/sec and 512Mbit/sec bandwidths re-
spectively. Even in the worst case (the starting phase of
SPECweb), a single pre-copy iteration reduces downtime
by a factor of four. In most cases we can expect to do
considerably better – for example both the Linux kernel
compile and the OLTP benchmark typically experience a
reduction in downtime of at least a factor of sixteen.
The remaining three lines show, in order, the effect of per-
forming a total of two, three or four pre-copy iterations
prior to the final stop-and-copy round. In most cases we
see an increased reduction in downtime from performing
these additional iterations, although with somewhat dimin-
ishing returns, particularly in the higher bandwidth cases.
This is because all the observed workloads exhibit a small
but extremely frequently updated set of ‘hot’ pages. In
practice these pages will include the stack and local vari-
ables being accessed within the currently executing pro-
cesses as well as pages being used for network and disk
traffic. The hottest pages will be dirtied at least as fast as
we can transfer them, and hence must be transferred in the
final stop-and-copy phase. This puts a lower bound on the
best possible service downtime for a particular benchmark,
network bandwidth and migration start time.
This interesting tradeoff suggests that it may be worthwhile
increasing the amount of bandwidth used for page transfer
in later (and shorter) pre-copy iterations. We will describe
our rate-adaptive algorithm based on this observation in
Section 5, and demonstrate its effectiveness in Section 6.
5 Implementation Issues
We designed and implemented our pre-copying migration
engine to integrate with the Xen virtual machine moni-
tor [1]. Xen securely divides the resources of the host ma-
chine amongst a set of resource-isolated virtual machines
each running a dedicated OS instance. In addition, there is
one special management virtual machine used for the ad-
ministration and control of the machine.
We considered two different methods for initiating and
managing state transfer. These illustrate two extreme points
in the design space: managed migration is performed
largely outside the migratee, by a migration daemon run-
ning in the management VM; in contrast, self migration is
implemented almost entirely within the migratee OS with
only a small stub required on the destination machine.
In the following sections we describe some of the imple-
mentation details of these two approaches. We describe
how we use dynamic network rate-limiting to effectively
NSDI ’05: 2nd Symposium on Networked Systems Design & ImplementationUSENIX Association 279
balance network contention against OS downtime. We then
proceed to describe how we ameliorate the effects of rapid
page dirtying, and describe some performance enhance-
ments that become possible when the OS is aware of its
migration — either through the use of self migration, or by
adding explicit paravirtualization interfaces to the VMM.
5.1 Managed Migration
Managed migration is performed by migration daemons
running in the management VMs of the source and destina-
tion hosts. These are responsible for creating a new VM on
the destination machine, and coordinating transfer of live
system state over the network.
When transferring the memory image of the still-running
OS, the control software performs rounds of copying in
which it performs a complete scan of the VM’s memory
pages. Although in the first round all pages are transferred
to the destination machine, in subsequent rounds this copy-
ing is restricted to pages that were dirtied during the pre-
vious round, as indicated by a dirty bitmap that is copied
from Xen at the start of each round.
During normal operation the page tables managed by each
guest OS are the ones that are walked by the processor’s
MMU to fill the TLB. This is possible because guest OSes
are exposed to real physical addresses and so the page ta-
bles they create do not need to be mapped to physical ad-
dresses by Xen.
To log pages that are dirtied, Xen inserts shadow page ta-
bles underneath the running OS. The shadow tables are
populated on demand by translating sections of the guest
page tables. Translation is very simple for dirty logging:
all page-table entries (PTEs) are initially read-only map-
pings in the shadow tables, regardless of what is permitted
by the guest tables. If the guest tries to modify a page of
memory, the resulting page fault is trapped by Xen. If write
access is permitted by the relevant guest PTE then this per-
mission is extended to the shadow PTE. At the same time,
we set the appropriate bit in the VM’s dirty bitmap.
When the bitmap is copied to the control software at the
start of each pre-copying round, Xen’s bitmap is cleared
and the shadow page tables are destroyed and recreated as
the migratee OS continues to run. This causes all write per-
missions to be lost: all pages that are subsequently updated
are then added to the now-clear dirty bitmap.
When it is determined that the pre-copy phase is no longer
beneficial, using heuristics derived from the analysis in
Section 4, the OS is sent a control message requesting that
it suspend itself in a state suitable for migration. This
causes the OS to prepare for resumption on the destina-
tion machine; Xen informs the control software once the
OS has done this. The dirty bitmap is scanned one last
time for remaining inconsistent memory pages, and these
are transferred to the destination together with the VM’s
checkpointed CPU-register state.
Once this final information is received at the destination,
the VM state on the source machine can safely be dis-
carded. Control software on the destination machine scans
the memory map and rewrites the guest’s page tables to re-
flect the addresses of the memory pages that it has been
allocated. Execution is then resumed by starting the new
VM at the point that the old VM checkpointed itself. The
OS then restarts its virtual device drivers and updates its
notion of wallclock time.
Since the transfer of pages is OS agnostic, we can easily
support any guest operating system – all that is required is
a small paravirtualized stub to handle resumption. Our im-
plementation currently supports Linux 2.4, Linux 2.6 and
NetBSD 2.0.
5.2 Self Migration
In contrast to the managed method described above, self
migration [18] places the majority of the implementation
within the OS being migrated. In this design no modifi-
cations are required either to Xen or to the management
software running on the source machine, although a migra-
tion stub must run on the destination machine to listen for
incoming migration requests, create an appropriate empty
VM, and receive the migrated system state.
The pre-copying scheme that we implemented for self mi-
gration is conceptually very similar to that for managed mi-
gration. At the start of each pre-copying round every page
mapping in every virtual address space is write-protected.
The OS maintains a dirty bitmap tracking dirtied physical
pages, setting the appropriate bits as write faults occur. To
discriminate migration faults from other possible causes
(for example, copy-on-write faults, or access-permission
faults) we reserve a spare bit in each PTE to indicate that it
is write-protected only for dirty-logging purposes.
The major implementation difficulty of this scheme is to
transfer a consistent OS checkpoint. In contrast with a
managed migration, where we simply suspend the migra-
tee to obtain a consistent checkpoint, self migration is far
harder because the OS must continue to run in order to
transfer its final state. We solve this difficulty by logically
checkpointing the OS on entry to a final two-stage stop-
and-copy phase. The first stage disables all OS activity ex-
cept for migration and then peforms a final scan of the dirty
bitmap, clearing the appropriate bit as each page is trans-
ferred. Any pages that are dirtied during the final scan, and
that are still marked as dirty in the bitmap, are copied to a
shadow buffer. The second and final stage then transfers the
contents of the shadow buffer — page updates are ignored
during this transfer.
NSDI ’05: 2nd Symposium on Networked Systems Design & Implementation USENIX Association280
5.3 Dynamic Rate-Limiting
It is not always appropriate to select a single network
bandwidth limit for migration traffic. Although a low
limit avoids impacting the performance of running services,
analysis in Section 4 showed that we must eventually pay
in the form of an extended downtime because the hottest
pages in the writable working set are not amenable to pre-
copy migration. The downtime can be reduced by increas-
ing the bandwidth limit, albeit at the cost of additional net-
work contention.
Our solution to this impasse is to dynamically adapt the
bandwidth limit during each pre-copying round. The ad-
ministrator selects a minimum and a maximum bandwidth
limit. The first pre-copy round transfers pages at the mini-
mum bandwidth. Each subsequent round counts the num-
ber of pages dirtied in the previous round, and divides this
by the duration of the previous round to calculate the dirty-
ing rate. The bandwidth limit for the next round is then
determined by adding a constant increment to the previ-
ous round’s dirtying rate — we have empirically deter-
mined that 50Mbit/sec is a suitable value. We terminate
pre-copying when the calculated rate is greater than the ad-
ministrator’s chosen maximum, or when less than 256KB
remains to be transferred. During the final stop-and-copy
phase we minimize service downtime by transferring mem-
ory at the maximum allowable rate.
As we will show in Section 6, using this adaptive scheme
results in the bandwidth usage remaining low during the
transfer of the majority of the pages, increasing only at
the end of the migration to transfer the hottest pages in the
WWS. This effectively balances short downtime with low
average network contention and CPU usage.
5.4 Rapid Page Dirtying
Our working-set analysis in Section 4 shows that every OS
workload has some set of pages that are updated extremely
frequently, and which are therefore not good candidates
for pre-copy migration even when using all available net-
work bandwidth. We observed that rapidly-modified pages
are very likely to be dirtied again by the time we attempt
to transfer them in any particular pre-copying round. We
therefore periodically ‘peek’ at the current round’s dirty
bitmap and transfer only those pages dirtied in the previ-
ous round that have not been dirtied again at the time we
scan them.
We further observed that page dirtying is often physically
clustered — if a page is dirtied then it is disproportionally
likely that a close neighbour will be dirtied soon after. This
increases the likelihood that, if our peeking does not detect
one page in a cluster, it will detect none. To avoid this
0
2000
4000
6000
8000
10000
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
4k
B
pa
ge
s
Iterations
Transferred pages
Figure 7: Rogue-process detection during migration of a
Linux kernel build. After the twelfth iteration a maximum
limit of forty write faults is imposed on every process, dras-
tically reducing the total writable working set.
unfortunate behaviour we scan the VM’s physical memory
space in a pseudo-random order.
5.5 Paravirtualized Optimizations
One key benefit of paravirtualization is that operating sys-
tems can be made aware of certain important differences
between the real and virtual environments. In terms of mi-
gration, this allows a number of optimizations by informing
the operating system that it is about to be migrated – at this
stage a migration stub handler within the OS could help
improve performance in at least the following ways:
Stunning Rogue Processes. Pre-copy migration works
best when memory pages can be copied to the destination
host faster than they are dirtied by the migrating virtual ma-
chine. This may not always be the case – for example, a test
program which writes one word in every page was able to
dirty memory at a rate of 320 Gbit/sec, well ahead of the
transfer rate of any Ethernet interface. This is a synthetic
example, but there may well be cases in practice in which
pre-copy migration is unable to keep up, or where migra-
tion is prolonged unnecessarily by one or more ‘rogue’ ap-
plications.
In both the managed and self migration cases, we can miti-
gate against this risk by forking a monitoring thread within
the OS kernel when migration begins. As it runs within the
OS, this thread can monitor the WWS of individual pro-
cesses and take action if required. We have implemented
a simple version of this which simply limits each process
to 40 write faults before being moved to a wait queue – in
essence we ‘stun’ processes that make migration difficult.
This technique works well, as shown in Figure 7, although
NSDI ’05: 2nd Symposium on Networked Systems Design & ImplementationUSENIX Association 281
one must be careful not to stun important interactive ser-
vices.
Freeing Page Cache Pages. A typical operating system
will have a number of ‘free’ pages at any time, ranging
from truly free (page allocator) to cold buffer cache pages.
When informed a migration is to begin, the OS can sim-
ply return some or all of these pages to Xen in the same
way it would when using the ballooning mechanism de-
scribed in [1]. This means that the time taken for the first
“full pass” iteration of pre-copy migration can be reduced,
sometimes drastically. However should the contents of
these pages be needed again, they will need to be faulted
back in from disk, incurring greater overall cost.
6 Evaluation
In this section we present a thorough evaluation of our im-
plementation on a wide variety of workloads. We begin by
describing our test setup, and then go on explore the mi-
gration of several workloads in detail. Note that none of
the experiments in this section use the paravirtualized opti-
mizations discussed above since we wished to measure the
baseline performance of our system.
6.1 Test Setup
We perform test migrations between an identical pair of
Dell PE-2650 server-class machines, each with dual Xeon
2GHz CPUs and 2GB memory. The machines have
Broadcom TG3 network interfaces and are connected via
switched Gigabit Ethernet. In these experiments only a sin-
gle CPU was used, with HyperThreading enabled. Storage
is accessed via the iSCSI protocol from an NetApp F840
network attached storage server except where noted other-
wise. We used XenLinux 2.4.27 as the operating system in
all cases.
6.2 Simple Web Server
We begin our evaluation by examining the migration of an
Apache 1.3 web server serving static content at a high rate.
Figure 8 illustrates the throughput achieved when continu-
ously serving a single 512KB file to a set of one hundred
concurrent clients. The web server virtual machine has a
memory allocation of 800MB.
At the start of the trace, the server achieves a consistent
throughput of approximately 870Mbit/sec. Migration starts
twenty seven seconds into the trace but is initially rate-
limited to 100Mbit/sec (12% CPU), resulting in the server
throughput dropping to 765Mbit/s. This initial low-rate
pass transfers 776MB and lasts for 62 seconds, at which
point the migration algorithm described in Section 5 in-
creases its rate over several iterations and finally suspends
the VM after a further 9.8 seconds. The final stop-and-copy
phase then transfer the remaining pages and the web server
resumes at full rate after a 165ms outage.
This simple example demonstrates that a highly loaded
server can be migrated with both controlled impact on live
services and a short downtime. However, the working set
of the server in this case is rather small, and so this should
be expected to be a relatively easy case for live migration.
6.3 Complex Web Workload: SPECweb99
A more challenging Apache workload is presented by
SPECweb99, a complex application-level benchmark for
evaluating web servers and the systems that host them. The
workload is a complex mix of page requests: 30% require
dynamic content generation, 16% are HTTP POST opera-
tions, and 0.5% execute a CGI script. As the server runs, it
generates access and POST logs, contributing to disk (and
therefore network) throughput.
A number of client machines are used to generate the load
for the server under test, with each machine simulating
a collection of users concurrently accessing the web site.
SPECweb99 defines a minimum quality of service that
each user must receive for it to count as ‘conformant’; an
aggregate bandwidth in excess of 320Kbit/sec over a series
of requests. The SPECweb score received is the number
of conformant users that the server successfully maintains.
The considerably more demanding workload of SPECweb
represents a challenging candidate for migration.
We benchmarked a single VM running SPECweb and
recorded a maximum score of 385 conformant clients —
we used the RedHat gnbd network block device in place of
iSCSI as the lighter-weight protocol achieves higher per-
formance. Since at this point the server is effectively in
overload, we then relaxed the offered load to 90% of max-
imum (350 conformant connections) to represent a more
realistic scenario.
Using a virtual machine configured with 800MB of mem-
ory, we migrated a SPECweb99 run in the middle of its
execution. Figure 9 shows a detailed analysis of this mi-
gration. The x-axis shows time elapsed since start of migra-
tion, while the y-axis shows the network bandwidth being
used to transfer pages to the destination. Darker boxes il-
lustrate the page transfer process while lighter boxes show
the pages dirtied during each iteration. Our algorithm ad-
justs the transfer rate relative to the page dirty rate observed
during the previous round (denoted by the height of the
lighter boxes).
As in the case of the static web server, migration begins
NSDI ’05: 2nd Symposium on Networked Systems Design & Implementation USENIX Association282
Elapsed time (secs)
0 10 20 30 40 50 60 70 80 90 100 110 120 130
Th
ro
ug
hp
ut
(M
bi
t/s
ec
)
0
200
400
600
800
1000
Effect of Migration on Web Server Transmission Rate
Sample over 100ms
Sample over 500ms
512Kb files
100 concurrent clients
1st precopy, 62 secs further iterations
9.8 secs
765 Mbit/sec
870 Mbit/sec
694 Mbit/sec
165ms total downtime
Figure 8: Results of migrating a running web server VM.
In the final iteration, the domain is suspended. The remaining
18.2 MB of dirty pages are sent and the VM resumes execution
on the remote machine. In addition to the 201ms required to
copy the last round of data, an additional 9ms elapse while the
VM starts up. The total downtime for this experiment is 210ms.
0 50 55 60 65 70
0
100
200
300
400
500
600
676.8 MB
VM memory transfered
Memory dirtied during this iteration
126.7 MB 39.0 MB
28.4 MB
24.2 MB
16.7 MB
14.2 MB
15.3 MB
18.2 MB
The first iteration involves a long, relatively low-rate transfer of
the VM’s memory. In this example, 676.8 MB are transfered in
54.1 seconds. These early phases allow non-writable working
set data to be transfered with a low impact on active services.
Iterative Progress of Live Migration: SPECweb99
350 Clients (90% of max load), 800MB VM
Total Data Transmitted: 960MB (x1.20)
Area of Bars:
Tr
a
n
s
fe
r
R
a
te
(M
b
it
/s
e
c
)
Elapsed Time (sec)
Figure 9: Results of migrating a running SPECweb VM.
with a long period of low-rate transmission as a first pass
is made through the memory of the virtual machine. This
first round takes 54.1 seconds and transmits 676.8MB of
memory. Two more low-rate rounds follow, transmitting
126.7MB and 39.0MB respectively before the transmission
rate is increased.
The remainder of the graph illustrates how the adaptive al-
gorithm tracks the page dirty rate over successively shorter
iterations before finally suspending the VM. When suspen-
sion takes place, 18.2MB of memory remains to be sent.
This transmission takes 201ms, after which an additional
9ms is required for the domain to resume normal execu-
tion.
The total downtime of 210ms experienced by the
SPECweb clients is sufficiently brief to maintain the 3
50
conformant clients. This result is an excellent validation of
our approach: a heavily (90% of maximum) loaded server
is migrated to a separate physical host with a total migra-
tion time of seventy-one seconds. Furthermore the migra-
tion does not interfere with the quality of service demanded
by SPECweb’s workload. This illustrates the applicability
of migration as a tool for administrators of demanding live
services.
6.4 Low-Latency Server: Quake 3
Another representative application for hosting environ-
ments is a multiplayer on-line game server. To determine
the effectiveness of our approach in this case we config-
ured a virtual machine with 64MB of memory running a
NSDI ’05: 2nd Symposium on Networked Systems Design & ImplementationUSENIX Association 283
Elapsed time (secs)
0 10 20 30 40 50 60 7
P
ac
ke
tf
lig
ht
tim
e
(s
ec
s)
0
0.02
0.04
0.06
0.08
0.1
0.12
Packet interarrival time during Quake 3 migration
M
ig
ra
tio
n
1
do
w
nt
im
e:
50
m
s
M
ig
ra
tio
n
2
do
w
nt
im
e:
48
m
s
Figure 10: Effect on packet response time of migrating a running Quake 3 server VM.
0 4.5 5 5.5 6 6.5 7
0
50
100
150
200
250
300
350
400
450
56.3 MB 20.4 MB 4.6 MB
1.6 MB
1.2 MB
0.9 MB
1.2 MB
1.1 MB
0.8 MB
0.2 MB
0.1 MBIterative Progress of Live Migration: Quake 3 Server
6 Clients, 64MB VM
Total Data Transmitted: 88MB (x1.37)
VM memory transfered
Memory dirtied during this iteration
Area of Bars:
Tr
a
n
s
fe
r
R
a
te
(M
b
it
/s
e
c
)
Elapsed Time (sec)
The final iteration in this case leaves only 148KB of data to
transmit. In addition to the 20ms required to copy this last
round, an additional 40ms are spent on start-up overhead. The
total downtime experienced is 60ms.
Figure 11: Results of migrating a running Quake 3 server VM.
Quake 3 server. Six players joined the game and started to
play within a shared arena, at which point we initiated a
migration to another machine. A detailed analysis of this
migration is shown in Figure 11.
The trace illustrates a generally similar progression as for
SPECweb, although in this case the amount of data to be
transferred is significantly smaller. Once again the trans-
fer rate increases as the trace progresses, although the final
stop-and-copy phase transfers so little data (148KB) that
the full bandwidth is not utilized.
Overall, we are able to perform the live migration with a to-
tal downtime of 60ms. To determine the effect of migration
on the live players, we performed an additional experiment
in which we migrated the running Quake 3 server twice
and measured the inter-arrival time of packets received by
clients. The results are shown in Figure 10. As can be seen,
from the client point of view migration manifests itself as
a transient increase in response time of 50ms. In neither
case was this perceptible to the players.
6.5 A Diabolical Workload: MMuncher
As a final point in our evaluation, we consider the situation
in which a virtual machine is writing to memory faster than
can be transferred across the network. We test this diaboli-
cal case by running a 512MB host with a simple C program
that writes constantly to a 256MB region of memory. The
results of this migration are shown in Figure 12.
In the first iteration of this workload, we see that half of
the memory has been transmitted, while the other half is
immediately marked dirty by our test program. Our algo-
rithm attempts to adapt to this by scaling itself relative to
the perceived initial rate of dirtying; this scaling proves in-
NSDI ’05: 2nd Symposium on Networked Systems Design & Implementation USENIX Association284
0 5 10 15 20 25
0
200
400
600
800
1000
Iterative Progress of Live Migration: Diabolical Workload
512MB VM, Constant writes to 256MB region.
Total Data Transmitted: 638MB (x1.25)
Elapsed Time (sec)
Tr
a
n
sf
e
r
R
a
te
(M
b
it
/s
e
c)
255.4 MB
44.0 MB
116.0 MB 222.5 MB
In the first iteration, the workload
dirties half of memory. The other half
is transmitted, both bars are equal.
VM memory transfered
Memory dirtied during this iteration
Area of Bars:
Figure 12: Results of migrating a VM running a diabolical
workload.
sufficient, as the rate at which the memory is being written
becomes apparent. In the third round, the transfer rate is
scaled up to 500Mbit/s in a final attempt to outpace the
memory writer. As this last attempt is still unsuccessful,
the virtual machine is suspended, and the remaining dirty
pages are copied, resulting in a downtime of 3.5 seconds.
Fortunately such dirtying rates appear to be rare in real
workloads.
7 Future Work
Although our solution is well-suited for the environment
we have targeted – a well-connected data-center or cluster
with network-accessed storage – there are a number of ar-
eas in which we hope to carry out future work. This would
allow us to extend live migration to wide-area networks,
and to environments that cannot rely solely on network-
attached storage.
7.1 Cluster Management
In a cluster environment where a pool of virtual machines
are hosted on a smaller set of physical servers, there are
great opportunities for dynamic load balancing of proces-
sor, memory and networking resources. A key challenge
is to develop cluster control software which can make in-
formed decision as to the placement and movement of vir-
tual machines.
A special case of this is ‘evacuating’ VMs from a node that
is to be taken down for scheduled maintenance. A sensible
approach to achieving this is to migrate the VMs in increas-
ing order of their observed WWS. Since each VM migrated
frees resources on the node, additional CPU and network
becomes available for those VMs which need it most. We
are in the process of building a cluster controller for Xen
systems.
7.2 Wide Area Network Redirection
Our layer 2 redirection scheme works efficiently and with
remarkably low outage on modern gigabit networks. How-
ever, when migrating outside the local subnet this mech-
anism will not suffice. Instead, either the OS will have to
obtain a new IP address which is within the destination sub-
net, or some kind of indirection layer, on top of IP, must ex-
ist. Since this problem is already familiar to laptop users,
a number of different solutions have been suggested. One
of the more prominent approaches is that of Mobile IP [19]
where a node on the home network (the home agent) for-
wards packets destined for the client (mobile node) to a
care-of address on the foreign network. As with all residual
dependencies this can lead to both performance problems
and additional failure modes.
Snoeren and Balakrishnan [20] suggest addressing the
problem of connection migration at the TCP level, aug-
menting TCP with a secure token negotiated at connection
time, to which a relocated host can refer in a special SYN
packet requesting reconnection from a new IP address. Dy-
namic DNS updates are suggested as a means of locating
hosts after a move.
7.3 Migrating Block Devices
Although NAS prevails in the modern data center, some
environments may still make extensive use of local disks.
These present a significant problem for migration as they
are usually considerably larger than volatile memory. If the
entire contents of a disk must be transferred to a new host
before migration can complete, then total migration times
may be intolerably extended.
This latency can be avoided at migration time by arrang-
ing to mirror the disk contents at one or more remote hosts.
For example, we are investigating using the built-in soft-
ware RAID and iSCSI functionality of Linux to implement
disk mirroring before and during OS migration. We imag-
ine a similar use of software RAID-5, in cases where data
on disks requires a higher level of availability. Multiple
hosts can act as storage targets for one another, increasing
availability at the cost of some network traffic.
The effective management of local storage for clusters of
virtual machines is an interesting problem that we hope to
further explore in future work. As virtual machines will
typically work from a small set of common system images
(for instance a generic Fedora Linux installation) and make
individual changes above this, there seems to be opportu-
nity to manage copy-on-write system images across a clus-
ter in a way that facilitates migration, allows replication,
and makes efficient use of local disks.
NSDI ’05: 2nd Symposium on Networked Systems Design & ImplementationUSENIX Association 285
8 Conclusion
By integrating live OS migration into the Xen virtual ma-
chine monitor we enable rapid movement of interactive
workloads within clusters and data centers. Our dynamic
network-bandwidth adaptation allows migration to proceed
with minimal impact on running services, while reducing
total downtime to below discernable thresholds.
Our comprehensive evaluation shows that realistic server
workloads such as SPECweb99 can be migrated with just
210ms downtime, while a Quake3 game server is migrated
with an imperceptible 60ms outage.
References
[1] Paul Barham, Boris Dragovic, Keir Fraser, Steven
Hand, Tim Harris, Alex Ho, Rolf Neugebauer, Ian
Pratt, and Andrew Warfield. Xen and the art of virtu-
alization. In Proceedings of the nineteenth ACM sym-
posium on Operating Systems Principles (SOSP19),
pages 164–177. ACM Press, 2003.
[2] D. Milojicic, F. Douglis, Y. Paindaveine, R. Wheeler,
and S. Zhou. Process migration. ACM Computing
Surveys, 32(3):241–299, 2000.
[3] C. P. Sapuntzakis, R. Chandra, B. Pfaff, J. Chow,
M. S. Lam, and M.Rosenblum. Optimizing the mi-
gration of virtual computers. In Proc. of the 5th Sym-
posium on Operating Systems Design and Implemen-
tation (OSDI-02), December 2002.
[4] M. Kozuch and M. Satyanarayanan. Internet sus-
pend/resume. In Proceedings of the IEEE Work-
shop on Mobile Computing Systems and Applications,
2002.
[5] Andrew Whitaker, Richard S. Cox, Marianne Shaw,
and Steven D. Gribble. Constructing services with
interposable virtual hardware. In Proceedings of the
First Symposium on Networked Systems Design and
Implementation (NSDI ’04), 2004.
[6] S. Osman, D. Subhraveti, G. Su, and J. Nieh. The de-
sign and implementation of zap: A system for migrat-
ing computing environments. In Proc. 5th USENIX
Symposium on Operating Systems Design and Im-
plementation (OSDI-02), pages 361–376, December
2002.
[7] Jacob G. Hansen and Asger K. Henriksen. Nomadic
operating systems. Master’s thesis, Dept. of Com-
puter Science, University of Copenhagen, Denmark,
2002.
[8] Hermann Härtig, Michael Hohmuth, Jochen Liedtke,
and Sebastian Schönberg. The performance of micro-
kernel-based systems. In Proceedings of the sixteenth
ACM Symposium on Operating System Principles,
pages 66–77. ACM Press, 1997.
[9] VMWare, Inc. VMWare VirtualCenter Version 1.2
User’s Manual. 2004.
[10] Michael L. Powell and Barton P. Miller. Process mi-
gration in DEMOS/MP. In Proceedings of the ninth
ACM Symposium on Operating System Principles,
pages 110–119. ACM Press, 1983.
[11] Marvin M. Theimer, Keith A. Lantz, and David R.
Cheriton. Preemptable remote execution facilities for
the V-system. In Proceedings of the tenth ACM Sym-
posium on Operating System Principles, pages 2–12.
ACM Press, 1985.
[12] Eric Jul, Henry Levy, Norman Hutchinson, and An-
drew Black. Fine-grained mobility in the emerald sys-
tem. ACM Trans. Comput. Syst., 6(1):109–133, 1988.
[13] Fred Douglis and John K. Ousterhout. Transparent
process migration: Design alternatives and the Sprite
implementation. Software – Practice and Experience,
21(8):757–785, 1991.
[14] A. Barak and O. La’adan. The MOSIX multicom-
puter operating system for high performance cluster
computing. Journal of Future Generation Computer
Systems, 13(4-5):361–372, March 1998.
[15] J. K. Ousterhout, A. R. Cherenson, F. Douglis, M. N.
Nelson, and B. B. Welch. The Sprite network oper-
ating system. Computer Magazine of the Computer
Group News of the IEEE Computer Group Society, ;
ACM CR 8905-0314, 21(2), 1988.
[16] E. Zayas. Attacking the process migration bottle-
neck. In Proceedings of the eleventh ACM Symposium
on Operating systems principles, pages 13–24. ACM
Press, 1987.
[17] Peter J. Denning. Working Sets Past and Present.
IEEE Transactions on Software Engineering, SE-
6(1):64–84, January 1980.
[18] Jacob G. Hansen and Eric Jul. Self-migration of op-
erating systems. In Proceedings of the 11th ACM
SIGOPS European Workshop (EW 2004), pages 126–
130, 2004.
[19] C. E. Perkins and A. Myles. Mobile IP. Pro-
ceedings of International Telecommunications Sym-
posium, pages 415–419, 1997.
[20] Alex C. Snoeren and Hari Balakrishnan. An end-to-
end approach to host mobility. In Proceedings of the
6th annual international conference on Mobile com-
puting and networking, pages 155–166. ACM Press,
2000.
NSDI ’05: 2nd Symposium on Networked Systems Design & Implementation USENIX Association286
Order an Essay Now & Get These Features For Free:
Turnitin Report
Formatting
Title Page
Citation
Outline
